Leopard Running V2 - 3D Printable sculpture 3D print model
This sculpture depicts a beautiful leopard running. The leopard looks straight ahead, and its body is very bent and legs are raised demonstrating its robustness and agility. With its long tail flowing in the wind, the leopard has a streamlined body and appears brave and powerful.
Developer-recommended FDM printing settings:
Material of printing: PLA
Head: Layer Height: 0.08mm Wall lines: 2 Suports: ON Infill:15~30% Infill patern: Gyroid or octet
Body part1: Layer Height: 0.1mm Wall lines: 3 Suports: ON Infill:25~30% Infill patern: Gyroid or octet
Body part2: Layer Height: 0.1mm Wall lines: 3 Suports: ON Infill:25~30% Infill patern: Gyroid or octet
Body part1: Layer Height: 0.1mm Suports: ON Infill: 100%
Pedestal: Layer Height: 0.18mm Wall lines: 4 Suports: Off Infill: 20% Infill patern: Gyroid or octet
When attaching the parts with the glue, make sure the parts are aligned.
Model dimensions: Sculpture: 130x54x308mm Pedestal: 25x74x146mm
Observation: -All files checked and optimized by AutoDesk Netfabb to avoid 3D printing issues. -It is recommended to sand all parts before gluing to avoid imperfections. -IMPORTANT!: Please this model is for personal use only! Do not use for commercial purposes without my authorization! you could be sued for this! thanks :)
This sculpture depicts a beautiful leopard running. The leopard looks straight ahead, and its body is very bent and legs are raised demonstrating its robustness and agility. With its long tail flowing in the wind, the leopard has a streamlined body and appears brave and powerful.
Developer-recommended FDM printing settings:
Material of printing: PLA
Head: Layer Height: 0.08mm Wall lines: 2 Suports: ON Infill:15~30% Infill patern: Gyroid or octet
Body part1: Layer Height: 0.1mm Wall lines: 3 Suports: ON Infill:25~30% Infill patern: Gyroid or octet
Body part2: Layer Height: 0.1mm Wall lines: 3 Suports: ON Infill:25~30% Infill patern: Gyroid or octet
Body part1: Layer Height: 0.1mm Suports: ON Infill: 100%
Pedestal: Layer Height: 0.18mm Wall lines: 4 Suports: Off Infill: 20% Infill patern: Gyroid or octet
When attaching the parts with the glue, make sure the parts are aligned.
Model dimensions: Sculpture: 130x54x308mm Pedestal: 25x74x146mm
Observation: -All files checked and optimized by AutoDesk Netfabb to avoid 3D printing issues. -It is recommended to sand all parts before gluing to avoid imperfections. -IMPORTANT!: Please this model is for personal use only! Do not use for commercial purposes without my authorization! you could be sued for this! thanks :)
3D Model formats
Format limitations
- Stereolithography (.stl) (5 files)74.9 MB
